다가트론

EN

Products

We have What you need for staining

Function Generator

8210 Series

Fetures

  • ·4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
  • ·Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and TTL
  • ·0.1Hz to 10MHz Frequency Output
  • ·Built in 7Digits External Counter Display measuring up to 100MHz
  • ·Internsal and External linear Sweep control from 1:1 to 100:1
  • ·Variable Symmetry for generating Sawtooth and Pulse waveforms
  • ·TTL leveled Square waveforms output
  • ·Variable DC Offset control
  • ·Variable Output level control with 20dB Attenuator and Amplitude control

8205 Series

Fetures

  • ·4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
  • ·Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and TTL
  • ·0.05Hz to 5MHz Frequency Output
  • ·Built in 7Digits External Counter Display measuring up to 100MHz
  • ·Internsal and External linear Sweep control from 1:1 to 100:1
  • ·Variable Symmetry for generating Sawtooth and Pulse waveforms
  • ·TTL leveled Square waveforms output
  • ·Variable DC Offset control
  • ·Variable Output level control with 20dB Attenuator and Amplitude control

8202/8203 Series

Fetures

  • ·4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
  • ·Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and TTL
  • ·0.03Hz to 3MHz Frequency Output (8203)
  • ·0.02Hz to 2MHz Frequency Output (8202)
  • ·Built in 6digits External Counter Display measuring up to 50MHz
  • ·Internsal and External linear Sweep control from 1:1 to 100:1
  • ·Variable Symmetry for generating Sawtooth and Pulse waveforms
  • ·TTL and CMOS leveled Square waveforms output
  • ·Variable DC Offset control
  • ·Variable Output level control with 20dB Attenuator and Amplitude control

Detail

Technical Specifications

MODEL 8210 8205 8203/
8202
Output
Characteristics 		Waveforms Sine, Square, Triangle Ramp,
Pulse, Sawtooth, TTL Leveled Square
(CMOS 8203/8202 only)
Frequency
Range		 0.1 HZ to
10 MHz
in 7
Range 		0.05 HZ to
5 MHz
in 7
Range 		0.03 Hz to
3 MHz in 7
Range(8203)
0.02 Hz to
2 MHz in 7
Range(8202)
Frequency
Accuary		 2% of full scale
Output
Level		 20 Vp-p in open circuit,
10 Vp-p into 50Ω Load
Output
Impedance		 50Ω ±5%
Attenuator 20dB fixed and continuously variable
DC
Offset
Control		 More than ±5V (into 50 ohm)
Waveform
Characteristics 		Sine
wave		 - Flatness: ±3 dB to Maximum Output,
Distortion : Less than 1% at 10 Hz to 100kHz
Square
wave		 - Rise and Fall Time: Less than 120 nS at 1MHz
Triangle
wave		 - Linearity: More than 99% at 0.2 Hz to 100kHz
TTL
Output		 - Rise and Fall time: Less than 25 nS at 1 MHz
- Output Level: TTL Level (H ≥ 2.4V, L ≤ 0.4 V)
CMOS
Output
(8203,
8202 only)		 - Rise and Fall time: Less than 160 nS
- Output Level: 4V to 15V ± 1V, Variable
Symmetry
Variation		 1:1 to 10:1
Sweep
Function
Characteristics 		Mode Linear
Width Variable from 1:1 to 100:1
Rate 0.5 Hz to 50 Hz (20mS to 2 S)
External
VCF
Input		 Input Voltage: 0 to 10 V,
Input Impedance: Approx. 1kohm
Frequency
Counter
Characteristics 		Display 7 digits
Green LED		 6 digits
Green LED
Frequency
Range		 0.2 Hz to
100 MHz		 0.2 Hz to
50 MHz
Accuracy ± Timebase Error ± 1 count
Low
pass
Filter		 Approx. -3 dB, 100kHz
Timebase 10 MHZ X-TAL, ± 20PPM
Input
Sensitivity		 100 mVms
Max.
Input
Voltage		 48 Vp-p
General Power Requirement 115 or 230 VAC ± 10%,
48 to 66Hz
Operating
Temperature 		0 to 50°C
(Accuracy specified at 23± 5°C)
Dimension 240(W) X 270(D) X 90(H) mm
Weight Approx. 3kg Approx. 2kg
Standard
Accessories 		Power Cord, BNC Cable,
Fuse, Instruction Manual